Fenix T6 Halberd v2 Pen Light / Glass Breaker

Fenix T6 Halberd flood light performance:

High: 80 lumens (40 min total run time), 18m beam
Med: 20 lumens (2.5 hrs), 12m beam
Low: 1 lumen (26 hrs), 5m beam

Fenix T6 features:

3 level LED light with electronic over heat protection
100 mAh Lipo battery built-in
USB-C charging (unscrew cap to reveal socket)
1 hr 20 min charge time
Ceramic glass breaker bead
Pocket clip
Twist mechanism to extend / retract ball point
Pen uses a Schmidt 6.8cm metal cartridge
Pen can be used separately while cap is charging
Made from A6061 T6 Aluminium
Type 111 hard anodized finish


Fenix T6 Halberd light operation:

Press the side button for 0.5 seconds to activate or de activate the light (The light activates at low brightness)
Single click the button with the light switched on to cycle Low - Mid - High brightness

Lock / Unlock:

Double click the operation button within 0.5 seconds to lock the light and prevent accidental operation. The LED will blink twice to indicate locked status. The LED will also blink twice if the button is pressed while the light is locked

Double click the operation button within 0.5 seconds to unlock the light. The light will activate in Low Mode

Charging:

Unscrew the pen cap to reveal the charging socket
Plug the supplied USB-C cable into the charge socket and the USB-A side of the cable into a mobile phone charger / PC etc
The indicator will glow red while charging and green once charged

LED battery level indication:

Single click the operating button with the light switched off and unlocked for battery status:

Solid green: 85-100%
Blinking green: 50-85%
Solid red: 25-50%
Blinking red: 1% to 25%

Both colours of the T6 have black ink cartridges fitted.