Description
This high-quality stainless steel bait pump makes collecting bait quick, efficient, and effortless. The slimmer tube design increases suction efficiency, drawing worms easily with less effort.
Built to last, the pump features strong welded handles with comfortable soft-grip rubber for excellent control, even with wet or cold hands. A convenient lubrication port near the handle ensures smooth operation and extends service life.
A spare parts kit is available separately.
Length - 80cm
Diameter - 32mm
Versatile bait pump manufactured by Axia.
Finished in Stainless Steel and fitted with pressure plates to maximize suction.
Place your Bait Pump 3 - 4 inches away from the cast and at a slight angle (20 degrees) to the cast, push the pump into the sand about 4 inches and pull the handle upwards removing from the hole, clear the pump of the sand you have just sucked up, repeat the process as above.
The worm will be brought up in the sand you have removed, and you will need to check each time you empty your pump, you should have the worm in 3 strokes, if you have not got the worm you will only be wasting time and would be far better moving to another cast and trying again. Practice really does make perfect and your first attempts may well be unproductive but keep on trying!!
As you can get plenty of worms in a short period of time, and the average cost being £3.00 for 10 - it can be well worth your while pumping your own bait.
Please note that the pump requires lubricating with oil - the most suitable being ordinary Vegetable Oil. Thoroughly clean your bait pump with fresh water after every session.
Spares pack to keep your pump in optimal condition including washers, joints and nuts are also available if required.
