Description
Flashmer stainless steel slim bait pump for sea fishing lug & black lug worms.
Length - 80cm
Diameter - 32mm
Versatile bait pump manufactured by Flashmer.
Finished in Stainless Steel and fitted with pressure plates to maximize suction.
Place your Bait Pump 3 - 4 inches away from the cast and at a slight angle (20 degrees) to the cast, push the pump into the sand about 4 inches and pull the handle upwards removing from the hole, clear the pump of the sand you have just sucked up, repeat the process as above.
The worm will be brought up in the sand you have removed, and you will need to check each time you empty your pump, you should have the worm in 3 strokes, if you have not got the worm you will only be wasting time and would be far better moving to another cast and trying again. Practice really does make perfect and your first attempts may well be unproductive but keep on trying!!
As you can get plenty of worms in a short period of time, and the average cost being £3.00 for 10 - it can be well worth your while pumping your own bait.
Please note that the pump requires lubricating with oil - the most suitable being ordinary Vegetable Oil. Thoroughly clean your bait pump with fresh water after every session.
Spares to keep your pump in optimal condition including washers, joints and nuts are also available if required.
